Medplum Self-Hosted Performance Benchmarks | Medplum

Executive Summary

One of the most common questions we hear from teams evaluating Medplum is: "Can it handle our scale?" We wanted to answer that question with real data. We recently ran a formal performance evaluation against a self-hosted Medplum deployment that mirrors one of our largest production clusters, and the results speak for themselves - peak throughput exceeding 46,000 requests per second for read-only traffic and nearly 7,000 requests per second for full read/write/search FHIR workflows, with zero HTTP failures across all scenarios.

Cluster Configuration

The cluster used for this evaluation mirrors one of Medplum's most extensive managed production clusters, making these results grounded in real-world infrastructure rather than a synthetic benchmark environment.

Testing Methodology

All tests were run using Grafana's hosted k6 testing framework, which is purpose-built for generating massive load through efficient script optimization. Key aspects of the methodology:

• Operating system configurations were adjusted to raise default network and user limits
• The load generator was monitored continuously to ensure optimal resource utilization
• Test scripts were crafted to account for k6 scripting nuances, options, and file handling
• A single k6 instance was configured to utilize all available CPU cores, enabling simulation of thousands of virtual users and hundreds of thousands of HTTP requests per second

Each scenario was configured to ramp up to 1,000 virtual users (VUs) over a 5 minute 30 second test window.

Scenario 1: Unauthenticated, Read-Only, No Database Access

Endpoint:HTTP GET /

This scenario tests the raw serving capacity of the Medplum API tier with no database involvement - reflecting performance for cached or statically resolved responses.

A total of 5,767,860 requests were made with a peak throughput of 46,750.67 reqs/s. The p95 response time was 30 ms, and zero HTTP failures were recorded. At steady state, the system handled an average of 16,972 requests/second.

Scenario 2: Unauthenticated, Read-Only, Database Access

Endpoint:HTTP GET /healthcheck

This scenario introduces database reads into the picture without authentication overhead, testing the throughput of simple DB-backed responses.

A total of 2,916,547 requests were made with a peak throughput of 14,733.67 reqs/s. The p95 response time was 89 ms, and the average request rate was 9,408 requests/second.

Scenario 3: Authenticated, Read-Only, Database Access

Endpoint:HTTP GET /fhir/R4/Patient/{id}

This scenario adds JWT authentication to a FHIR read operation, reflecting the typical performance profile for reading a single FHIR resource in a production application.

A total of 3,641,640 requests were made with a peak throughput of 20,796.67 reqs/s. The p95 response time was 57 ms, and the average request rate was 11,747 requests/second.

Scenario 4: Authenticated, Read, Write, and Search

This is the most realistic scenario - simulating a real-world application workflow that creates, reads, and searches for FHIR Patient resources under load.

A total of 743,313 requests were made with a peak throughput of 6,738.33 reqs/s. The p95 response time was 403 ms, and the average request rate was 2,398 requests/second.

Zero HTTP failures were recorded across all three endpoint types.

Summary

These results demonstrate that a properly configured self-hosted Medplum deployment can handle demanding production workloads with strong latency characteristics and zero error rates. The cluster configuration used here - 15 Fargate instances backed by a high-memory PostgreSQL node and a Redis cache - represents a realistic mid-to-large production setup.

For teams evaluating Medplum for high-throughput applications, these benchmarks provide a concrete baseline for capacity planning. Questions about sizing, configuration, or performance optimization? Join the conversation on Discord or reach out to the Medplum team.